£450k appeal launched to fund the tender behind Prince of Wales



Time to read

5 minutes

The team behind the project to build Britain’s most powerful express passenger steam locomotive has launched a new £450,000 appeal.

The money raised will fund the manufacture of the tender for new Gresley class ‘P2’ No. 2007 Prince of Wales.

The A1 Steam Locomotive Trust has set itself the challenge of raising £450,000 through The Tender Club from 250 supporters each donating £1,500 (plus Gift Aid) to the project in up to 15 payments of £100 by standing order.

Article continues below…

The order to manufacture the tender tank has been placed with North View Engineering Solutions of Darlington. The tender frames are currently under construction at I D Howitt of Crofton, Wakefield.

The Gresley class ‘P2’ 2-8-2 ‘Mikados’ were the most powerful express passenger locomotives to operate in the UK. They were designed by Sir Nigel Gresley in the 1930s to haul 600-ton trains on the arduous Edinburgh to Aberdeen route. Sadly, the design was never fully developed, and they were rebuilt by Gresley’s successor Edward Thompson into ungainly class ‘A2’ 2 4-6-2 Pacifics in 1943/4, and scrapped by 1961.

The A1 Steam Locomotive Trust (A1SLT) – a registered charity and builders of famous new 100mph steam locomotive No. 60163 Tornado – is constructing the seventh member of this class at its Darlington Locomotive Works (DLW) over seven years, at an estimated cost of £5million, through its P2 Steam Locomotive Company subsidiary.

Article continues below…

The project will demonstrate how the design can be fully realised through use of modern computer design techniques, enabling the new locomotive to deliver its full potential hauling passenger trains at high speed across today’s national network.

If the project is to remain on schedule to complete No. 2007 by 2021, the trust needs to take delivery of the tender frames and tank in autumn 2019.

Mark Allatt, ‘P2’ project director and trustee, The A1 Steam Locomotive Trust, commented: “We are delighted with the level of support that the project to has received since its launch. Thanks to our supporters’ continued generosity, over £3.2million has now been donated or pledged.

Article continues below…

“I would encourage all steam enthusiasts who haven’t yet contributed to this exciting project to help us to meet these deadlines by becoming a member of The Tender Club or a monthly ‘P2 for the price of a pint of beer a week’ Covenantor.”

In return for supporting this appeal, special benefits for members of The Tender Club include:

* Opportunity to buy a ticket (seat already reserved) on one of the first trains hauled by No. 2007 Prince of Wales

Article continues below…

* Reasonable access to No. 2007 at all times

* Opportunity to buy an exclusive Tender Club badge

* Opportunity to join one of the teams building No. 2007

* First choice of other components to sponsor

* Special Tender Club day with Tornado

* Special limited-edition print of Stephen Bainbridge’s Locomotives of the future painting

The tender for No. 2007 Prince of Wales is based closely on the tender built for ‘A1’ class No. 60163 Tornado. The original ‘P2’ tenders were to the 1930s non-corridor design built for the new ‘A3’ Pacifics being built at that time.

The water capacity of the original design was 5,000 gallons, which at a typical consumption of 45 gallons per mile would provide a range between water stops of 80 miles (with as safety margin).

The tender for Tornado was re-designed to increase the water capacity to 6,250 gallons, which increases the range to about 110 miles. The additional water capacity is at the expense of a reduction in coal capacity from 9 tons to 7½ tons.

The tender tank will be a fully welded structure made from weathering steel (as used on motorway bridges and the Angel of the North) to provide improved resistance to corrosion. The main visible differences with the new tender when compared to that of Tornado will be the curving inwards of the side sheets at the front to match the shape of the cab sides, and the extensive use of half-round beading along the front and top of the sides and the top of the back of the tank.

Progress building Britain’s most powerful steam locomotive continues at Darlington Locomotive Works and includes:

* Frame plates for engine and tender rolled and profiled; engine’s frames erected at Darlington Locomotive Works; all major engine frame stays, brackets, horn blocks, axle boxes and buffers cast (44 in total); more than 1,000 fitted and driven bolts ordered and delivered, about 800 now fitted to the frames

* All engine wheelsets complete; materials for tender wheelsets, including tyres, axles and wheel centres delivered

* Preliminary discussions held with boiler manufacturers and forged foundation ring corners manufactured and machined; boiler design study commissioned; start made on boiler fittings with castings for combined injector steam and delivery valves; regulator castings delivered; superheater header cast and machined

* Study into ride and suspension completed using rail industry standard Vampire® software; finite Element Analysis completed on re-designed crank axle to ensure locomotive complies with modern standards; assessment and notified body appointed to oversee certification – first site visit made

* Cab erected and cab side and spectacle window frames fitted; engine footplating and splasher kits delivered and permanently fitted to frames

* Smokebox door pressed; details made and door completed; door frame manufactured; smokebox delivered and erected; chimney cast and fitted

* Crosshead castings received

* Boiler cladding assembly jig built; cladding crinolines and hoops rolled and fitted to jig; cladding sheets procured, rolled and fitted to jig; jig trial fitted to the frames

* Tender frame construction under way, axlebox and other tender castings ordered from William Cook Cast Products

* Nameplates and chime whistle delivered

* Significant progress on design and manufacture of pipework

* More than £2m spent, £2.5m raised and £3.2m pledged of the required £5m.


Railway Reads

From the history of steam through to 21st century rail transport news, we have titles that cater for all rail enthusiasts. Covering diesels, modelling, steam and modern railways, check out our range of magazines and fantastic subscription offers.

Get The Railway Hub Weekly Round-up

Enter your e-mail address below and you will receive weekly rail news straight into your inbox…

You can unsubscribe at any time.

Latest Issue

Newsletter Signup

Enter your e-mail address below and you will receive weekly rail news straight into your inbox…

You can unsubscribe at any time.