Running-in your new model locomotive

Posted

by

Many readers will have received new model locomotives for Christmas – but they need to be carefully prepared for use, and running-in is an important part of ensuring years of reliable service, writes Nigel Burkin.

‘Running-in’ or ‘breaking-in’ new models is a perennial subject, and one that comes to the fore around Christmas. Many people come into the hobby through receiving model railway equipment as a gift.

Operating and maintenance instruction leaflets are provided with all new equipment such as locomotives, train packs and train sets, and one sage piece of advice, usually expressed in a couple of words, is: “Before use, we recommend running the locomotive in at a constant medium speed for 15 minutes in either direction.”

Article continues below…
Advert

That’s taken from the Hatton’s Model Railways leaflet supplied with its lovely Andrew Barclay 0-4-0ST locomotive, but what is running-in anyway? How do you do it, and what is a medium speed? That will vary from locomotive type to locomotive type, because a Class 47 will be run at higher speed than the Andrew Barclay, for example.

Models of all sizes benefit from running-in when new or after being out of use for a time. Shunting engines such as the Hatton’s Andrew Barclay 16 0-4-0ST must run at slow speeds, and running-in will help to achieve that goal.

This article explains the simple but important process of running-in new models and some of the equipment designed to help you do it well. The practice has many benefits, and will keep your valuable models in good condition for many years to come. It’s a task that should be completed before installing a decoder, because DCC rarely improves a poorly-performing model.

Today’s models are manufactured with precision mechanisms and high-performance motors to produce the fine running qualities we have come to expect as the norm. Lubrication is undertaken at the factory, and this is ample for the first year or so of the model’s life — unless it has been sitting on a shelf for a protracted time causing lubricant to dry out. In such cases, light re-lubrication (with plastic-safe model lubricants) according to the maintenance instructions is required.

Article continues below…
Advert
Railcars are no exception to the running-in process and this Heljan ‘OO’ gauge Park Royal rail car runs on a compact end-to-end layout where close control is important, helped by careful maintenance, cleaning and the occasional spin on a rolling road to keep it running well between operating sessions.

Running-in distributes lubricant around bearings in the chassis and those supporting drive shafts and gears in gear towers, while motor commutator brushes are gently bedded in.

As a model is broken-in progressively, the mechanism should become quieter and smoother, making fine slow speed control possible in all types of models.

Wear in the bearings, particularly motor bearings, is reduced in the long term and generally the model appears to ‘settle down’ as it loosens up a little. It’s no different in that respect from any other piece of mechanical equipment.

Article continues below…
Advert

For the full article and to view more images, see the January 2019 edition of Modelling – available now!
For a complete list of stockists and how to get your copy, visit: www.railwaymagazinemodelling.co.uk/distributors



Advert

Railway Reads

From the history of steam through to 21st century rail transport news, we have titles that cater for all rail enthusiasts. Covering diesels, modelling, steam and modern railways, check out our range of magazines and fantastic subscription offers.

Posted

in

Tags:

Latest Issue

Newsletter Signup